Elambarithi D, Department of Mechanical Engineering, Kongunadu College of Engineering and Technology, Mail: email@example.com, Phone: +91 7708939587
Anandha valampuri M R, Department of Mechanical Engineering, Kongunadu College of Engineering and Technology, Mail: valam.vinayaga @gmail.com, Phone: +91 8870507054
Karthikeyan.M, Department of Mechanical Engineering, Kongunadu College of Engineering and Technology, Mail: firstname.lastname@example.org,
Manikandan S, Department of Mechanical Engineering, Kongunadu College
of Engineering and Technology, Mail: email@example.com, Arunkumar.G, Department of Mechanical Engineering, Kongunadu College of Engineering and Technology, Mail: firstname.lastname@example.org,
Elambarithi.D, Anatha valampuri.M.R, Karthikeyan.M, Manikandan.S, Arunkumar.G, "Design of Fuel Filter Casing By Single Plate Injection Moulding Die" International Journal of Engineering Works, Vol. 2, Issue 2, PP. 11-14, Feb. 2015.
 A.S. Sabau and S. Viswanathan, “Material properties for predicting wax pattern dimensions in investment casting”, Material Science and Engineering A, vol. 362, 2003, pp 125–134.
 V.F. Okhuysen, K. Padmanabhan, and R.C. Voigt, “Tooling allowance practices in investment casting industry”, Proceedings of the 46th Annual Technical Meeting of the Investment Casting Institute, Orlando, USA, 1998, Paper no. 1.
 J.C. Gebelin and M.R. Jolly, “Modeling of the investment casting process”, Journal of Material Processing Technology, vol. 135, 2003, pp 291 – 300.
 W. Bonilla, S. H. Masood and P. Iovenitti, “An investigation of wax patterns for accuracy improvement in investment casting parts”, Bulletin of Industrial Research Institute of Swineburne, Melbourne, Australia, vol. 18, 2001, pp 348 – 356.
 B. Singh, P. Kumar, and B.K. Mishra, “Optimization of injection parameters for making wax patterns to be used in ceramic shell investment casting”, Proceedings of Asian Symposium on Materials and Processing, 2006, Thailand.
 Q. Liu, G. Sui and M.C. Leu, “Experimental Study on the ice pattern fabrication for the investment casting by rapid freeze prototyping (RFP)”, Computers in Industry, vol. 48, 2002, pp 181 – 197.
 Q. Liu, V.L. Richards, M.C. Leu, and S.M. Schmitt, “Dimensional accuracy and surface roughness of rapid freeze prototyping ice patterns
and investment casting metal parts”, International Journal of Advanced Manufacturing Technology, vol. 24, 2004, pp 485–495.
 S.A.M. Rezavand and A.H. Behravesh, “An experimental investigation on dimensional stability of injected wax patterns of gas turbine blades”, Journal of Materials Processing Technology, vol. 182, 2007, pp 580–587.