Among different types of fuel cells, the proton exchange membrane fuel cell (PEMFC) represents promising technology due to its lower operating temperature and higher efficiency. PEMFC can bring revolution in automobile industry by providing power to drive by consuming less fuel in a environmental friendly way. However, right now the main hurdle for its commercialization is the sluggish oxygen kinetics or slow reduction of oxygen at respective electrodes. To accelerate the sluggish oxygen reduction reaction (ORR) different types of expensive noble Pt alloys has been used as catalyst at cathode. The use of Pt based catalysts increases the cost of PEM fuel cell production therefore extensive research has been carried out to explore and develop different kinds of low costcatalysts as an alternative option. This study involves fabrication and testing of Ni-Pt ZIF as substitute electrocatalyst for cathode in PEM fuel cell. Ni-Pt has found to be a good substitute with a peak power density of 450 mW.cm-2 at temperature of 75℃ with Nickle to Platinum ratio of 9:1.
Shahbaz Ahmad Dr. Saim Saher Mushtaq Ahmed and Abid Ullah Performance Evaluation of Nickle Platinum Novel Electrocatalysts for Proton Exchange Membrane Fuel International Journal of Engineering Works Vol. 6 Issue 01 PP. 39-43 January 2019
· [1] Novel materials for solid oxide fuel cell technologies: A literature review. Fellipe Sartori da Silva, Teofilo Miguel de Souza J. Clerk
· [2] Maxwell, A Treatise on Electricity and Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892, pp.68–73.
· [3] K. Elissa Thermodynamics of Fuel Cells, Springer, 1st Edition, 2008.
· [4] Analysis performance of proton exchange membrane fuel cell (PEMFC) A. N. A. Mubin1, M. H. Bahrom1, M. Azri1, Z. Ibrahim1, N. A. Rahim2 and S. R. S. Raihan2
· [5] RYAN O’HAYRE, Fuel Cell Fundamentals, Springer, Third edition, 2013.
· [6] Chaojie Song and Jiujun Zhang, Electrocatalytic Oxygen Reduction Reaction, Springer, 2012, 89-34.
· [7] A. J. Appleby, J. Electroanal. Chem., 1993, 357, 117–179.
· [8] Recent Progress on MOF-Derived Nanomaterials as Advanced Electrocatalysts in Fuel Cells Zhongxin Song, Niancai Cheng, Andrew Lushington and Xueliang Sun H. A. Gasteiger, S. S. Kocha, B. Sompalli and F. T. Wagner, Appl. Catal., B, 2005, 56, 9–35
· [9] QLongZhu, RuqiangZou, QiangXu, Metal Organic Frameworks for energy applications, Chem., 2017, 52-77.
· [10] Rabis, A.; Rodriguez, P.; Schmidt, T.J. Electrocatalysis for polymer electrolyte fuel cells: Recent achievements and future challenges. Acs Catal. 2012, 2, 864–890.
· [11] Cheng, N.; Mu, S.; Pan, M.; Edwards, P.P. Improved lifetime of PEM fuel cell catalysts through polymer stabilization. Electrochem. Commun. 2009, 11, 1610–1614.
· [12] Madhu Sudan Saha, Vladimir Neburchilov, Dave Ghosh and Jiujun Zhang Nanomaterials-supported Pt catalysts for proton exchange membrane fuel cells, Wires Energy and Environment, Vol. 2, 2012, 32-45.
· [13] Alexeyeva et al. Electro reduction of oxygen on nitrogen-doped carbon nanotube modified glassy carbon electrodes in acid and alkaline solutions. Journal of Electro analytical Chemistry, (2010), 169-175.
· [14] http://www.northerngraphite.com/about-graphite/graphite-growth-markets/fuel-cells/
· [15] Non-Precious Metal Catalysts Prepared By Zeolitic Imidazolate Frameworks: The Ligand Influence to Morphology and Performance.
· [16] https://www.zswbw.de/fileadmin/user_upload/PDFs/Vorlesungen/est3/FCF_A4.pdf
· [17] The power performance curve for engineering analysis of fuel cells Jay B. Benziger ∗, M. Barclay Satterfield, Warren H.J. Hogarth, James P. Nehlsen, Ioannis G. Kevrekidis. Journal of Power Sources 155 (2006) 272–285.
· [18] http://www.chem.tamu.edu/class/fyp/stone/tutorialnotefiles/electro/nernst.htm.