Linking the Researchers, Developing the Innovations Manuscripts submittal opens till 30 October 2024. Please submit your papers at editor@kwpublisher.com or editorkwpublisher@gmail.com

  • Volume 2019

    Power Quality Enhancement in Distribution System using Dynamic Voltage Restorer
    (International Journal of Engineering Works)

    Vol. 6, Issue 05, PP. 176-181, May 2019
    10.34259/ijew.19.605176181
    Keywords: Dynamic Voltage Restorer (DVR), Total Harmonics Distortion (THD), voltage source inverter, Voltage sag.

    Download PDF

    Abstract

    The applications of Power quality at industrial and commercial scale is very important to be assured for the customer. But due to some reasons the load power system destructed like Sags of voltage, destruction of harmonics, irregularity in the voltage waveform and transient. Sensitive devices of power may also be harshly effected by voltage sags and change in the harmonics. Due to increase the heat in the power system devices and electrodes problem of harmonics could occur that may lead to failure of different speed drives and spin pulses in motors. The necessary requirement in the power system is decrease in harmonics. The use of DVR (Dynamic Voltage Restorer) in the power system devices is the source of reduction of this problem.  To overcome the disturbance of voltage Sag and harmonics, it is the efficient and economical solution. Reduction of Total Harmonic Distortion (THD) will increase the quality performance of power system. Dynamic Voltage Restorer is used in this paper. Reduction in % THD and voltage sag are successfully corrected by using DVR on MATLAB/SIMULINK Software Package.

    Author

    1. Abdullah Taj: University of Engineering & Technology, Peshawar

    2. Muhammad Naeem Arbab: University of Engineering & Technology, Peshawar

    Full Text

    Cite

    Muhammad Taj and Muhammad Naeem Arbab Power Quality Enhancement in Distribution System using Dynamic Voltage Restorer International Journal of Engineering Works Vol. 6 Issue 05 PP. 176-182 May 2019

    References

     
    1. A. Teke, "MODELING OF DYNAMIC VOLTAGE RESTORER", Master of Science, UNIVERSITY OF ÇUKUROVA, Adana, September 2005.

    2. M.D. STUMP, G.J. KEANE, and F.K.S. LEONG, "The Role of Custom Power Products in Enhancing Power Quality at Industrial Facilities", IEEE Energy Management and Power Delivery, 1998, 2: PP. 507-517.

    3. A. Ghosh and G. Ledwich, “Power Quality Enhancement Using Custom Power Devices,” Kluwer Acdemic Publishers, 2002.

    4. R. Buxton, "Protection from voltage dips with the dynamic voltage restorer," IEE Half Day Colloquium on Dynamic Voltage Restorers – Replacing Those Missing Cycles, 1998, pp. 3/1- 3/6.

    5. N.G. Hingorani, “Introducing Custom Power in IEEE Spectrum,” 32p, 1995, pp. 4l-48.

    6. M.H.J. BOLLEN," Voltage Sags in Three Phase Systems. IEEE Power Engineering Review", 2001, 21(9): 8-11.

    7. Sanjay Haribhai chaudhary ,Mr.Gaurav Gangali “Mitigation of voltage sags and swell using DVR”.IOSR,vol 8,issue 4 (Nov-dec 2013).