Production of Liquid and Solid Fuel by the Technique of Microwave Pyrolysis of Scrap Tires and its Analysis
-
Volume 2019
Production of Liquid and Solid Fuel by the Technique of Microwave Pyrolysis of Scrap Tires and its Analysis
(International Journal of Engineering Works)
Vol. 6, Issue 06, PP. 202-207, June 2019
10.34259/ijew.19.606202207
Keywords: Pyrolysis, Microwave Heating, Pyrolytic Oil, Biomass, Renewable Energy, waste Tires. Rubber.
Download PDFAbstract
The discussion in this paper is about the possible use of microwave pyrolysis technique as an energy-capable alternative to present heating techniques in biomass waste processing and treatment for renewable energy system. The wreck tires have relevant disposal or recycling issues under environment and financial and sustainable modes. These techniques can be a challenging for manufacturing and intellectual learning researches. In this competition, pyrolysis is a latest, strong substitute to the reprocessing of useless tires, until unless it will be possible to produce value adding results. In any case, upgrades in warmth exchange innovation are fundamental to enhance the plenitude of the procedure. Here we are describing the usage of microwave radiation (MW) as one of the most beneficial heating skills for pyrolysis. Whereas, there are different techniques for the process of the waste tires in previous era, such as crushing to get crumbs and rubber powder, burning them in cement furnaces for thermal power generation, re-stepping, decomposition by chemicals Heat degradation of rubber materials. The important and valuable chemicals in commercial use are derived from oils which are obtained from pyrolysis process by subjecting the pyrolytic oils to a fraction distillation at a temperature of about 207 ° C (under atmospheric) pressure for the product of at least one commercially valuable Chemical to isolate at least one commercially valuable chemical. Some of the selected chemicals from the group, consisting of paraffin, naphenes, olefins and flavorings. Particularly valuable chemicals that can be extracted from ripe pyrolytic oils are benzene, toluene, xylene, styrene and lime dl. The distillation fraction, which boils above 204 ° C, can be used as an extension oil in the production of various rubber and plastic parts. An improved process for producing the carbon black by microwave pyrolysis (MWP) of used rubber tires is also revealed. The recovered products which have high commercial value indicates advantage over traditional, more destructive disposal methods, and it also advice the very great capability for measuring the process and feedback to the commercial as well as industrial level.
Author
-
Kaleemullah: Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, China Nanjing, China.
-
Ben Haoxi: Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, China Nanjing, China.
-
Zhihong Wu: Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, China Nanjing, China.
Full Text
Cite
Kaleemullah Ben Haoxi and Zhihong Production of Liquid and Solid Fuel by the Technique of Microwave Pyrolysis of Scrap Tires and it International Journal of Engineering Works Vol. 6 Issue 06 PP. 202-207 June 2019
References
[1] Wang, H., et al., Characterization of Bitumen Modified with Pyrolytic Carbon Black from Scrap Tires. Sustainability, 2019. 11(6): p. 1631.
[2] Alvarez, J., et al., Improving bio-oil properties through the fast co-pyrolysis of lignocellulosic biomass and waste tyres. Waste Management, 2019. 85: p. 385-395.
[3] Zhang, X. and R.C. Brown, Introduction to Thermochemical Processing of Biomass into Fuels, Chemicals, and Power. Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, 2019: p. 1-16.
[4] Kalogiannis, K.G., S.D. Stefanidis, and A.A. Lappas, Catalyst deactivation, ash accumulation and bio-oil deoxygenation during ex situ catalytic fast pyrolysis of biomass in a cascade thermal-catalytic reactor system. Fuel Processing Technology, 2019. 186: p. 99-109.
[5] Haeldermans, T., et al., Microwave assisted and conventional pyrolysis of MDF–characterization of the produced biochars. Journal of Analytical and Applied Pyrolysis, 2019. 138: p. 218-230.
[6] Martínez, J.D., et al., Waste tyre pyrolysis–A review. Renewable and Sustainable Energy Reviews, 2013. 23: p. 179-213.
[7] van Geldern, R., et al., Stable carbon isotope analysis of dissolved inorganic carbon (DIC) and dissolved organic carbon (DOC) in natural waters–Results from a worldwide proficiency test. Rapid Communications in Mass Spectrometry, 2013. 27(18): p. 2099-2107.
[8] Venderbosch, R.H., Fast pyrolysis. Thermochemical processing of biomass: conversion into fuels, chemicals and power, 2019: p. 175-206.
[9] Lin, C.J. and W.L. Hergenrother, Tire compositions comprising epoxidized natural rubber and a functionalized polyolefin. 2005, Google Patents.
[10] Kumarn, S., et al., Investigating the Mechanistic and Structural Role of Lipid Hydrolysis in the Stabilization of Ammonia-Preserved Hevea Rubber Latex. Langmuir, 2018. 34(43): p. 12730-12738.
[11] Schürmann, O., Pneumatic Vehicle Tyres. 2018, Google Patents.
[12] Gauthier-Maradei, P., C.P.T. Ruiz, and M. Capron, Oil and Aromatic Yield Maximization During Pyrolysis of Scrap Tire Rubber. Waste and Biomass Valorization, 2019: p. 1-11.
[13] De Sciarra, F.M. and P. Russo, Experimental Characterization, Predictive Mechanical and Thermal Modeling of Nanostructures and Their Polymer Composites. 2018: William Andrew.
[14] Dimpe, K.M., A. Mpupa, and P.N. Nomngongo, Microwave assisted solid phase extraction for separation preconcentration sulfamethoxazole in wastewater using tyre based activated carbon as solid phase material prior to spectrophotometric determination. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 2018. 188: p. 341-348.
-
Copyright KWP Journals
All articles are licensed under a Creative Commons Attribution 4.0 International License.
Developed By Yaser Riaz
